HOW TO MAKE FRESH YOGHURT WITHOUT STARTER CULTURE

 

Fresh yoghurt making is quite complicated. There are various articles on the internet making it seems that yoghurt making is quite simple. The assertion that yoghurt making is simple may be true depending the equipment available to them. This article is not to debunk the assertion that yoghurt making simple. However, this article seeks to provide you with the method and process to making fresh yoghurt that we know and have been working with. If followed careful, you should be able to produce fresh yoghurt without any complication which will point to the fact that, yoghurt making is simple...LOL

Ingredient

1. Milk powder                      370 grams
   
2. Liquid Starter Culture       200 ml
   
3. Sugar                                 150 grams
   
4. Flavor                               To your taste
   
5. Food Color                       To your taste
   

 Process

Our method of making yoghurt is quite simple on the outside but it is also complicated as it could turn out to be fine or the other way round. However, if you follow the steps outlined below, you should make yoghurt without any problem.

Step 1

Measure your milk powder and pour into your bowl and add water. There are various brands of milk powder and in Ghana, the most noted ones for yoghurt making are DANO, MILAC and LP.
After adding the water, mix well with your whisk.

 Step 2

Add hot water to the mixture in step 1 and ensure that the temperature is around 40 degree celcius. You could check the temperature with your finger by dipping your index finger into it and then start to count 1 through to 14. But seriously you should get a themometer.

Step 3

After getting the 40 degree celcius, add your liquid starter culture to it and then cover it and incubate it for 12 hours. This is where the problem has always been for those who do not have the incubation machine. Cover the bowl with something that could retain the heat throughout the incubation period.

 Step 4

After 12 hours, your yoghurt should cuddle. When you see that, you should add your sugar and flavors as well as the food color. Bottle and refrigerate. Done. 

If you follow the process very well, you should be able to prepare FRESH YOGHURT without any problem. If you want to use it for business…kindly call me on 0541678743.

Please don’t forget to leave your comment and also don’t forget to follow our blog to learn how to produce other products.

USE PLANTAIN PEELS TO MAKE SOAP

 

Plantain peel has enormous skincare benefits and that makes it such a worthwhile ingredient to include in your skincare regime. Plantain peels is rich in the following nutrient for the skin 

• Vitamin A, 
• Allantoin, 
• Apigenin, 
• Aucubin, 
• Bicalein, 
• Linoleic acid, 
• Leanolic acid, 
• Sorbitol
• Tannin, 

All these nutrients promote wound healing, speed up cell regeneration, and have skin-softening effects. It can be used to treat skin disorders and defects, such as wrinkles, skin allergies, and acne, and can reduce scarring as a result.This article will teach you how to use plantain peels to make soap.

INGREDIENTS

As mentioned earlier, ingredients for making soap is readily available in the market and it is very cheap for anyone to buy. In this soap we are going to make, we will need for the following chemicals.

• Caustic Soda                           250ml
• Oil -  Palm Kernel Oil             500 ml
• Silicate                                    10 ml
• Fragrance                                10 ml
• Glycerin                                  15 ml
• Plantain Peels
  
• Soap Mold

 PROCESS

Following this process accordingly, should help you prepare or make about 12 tablets of soap from the ingredients listed up there.

• Blend the Plantain peel and squeeze out the juice in it
  
• Soak it with caustic soda and leave it for 3 days to ferment
• After 3 days, Pour your oil in a bowl
• Fetch about 250 ml of the caustic soda solution (lye) to it and stir for it to mix well
• Add your glycerin and silicate and stir
  
• Add your fragrance to the mix and stir very well.
• Pour the soap solution or mixture into your mold to get the desired shape.

CAUTION!

Lye is extremely caustic. It causes burns if splashed on the skin and can cause blindness if splashed into the eye. If drunk, they can be fatal. Because of these dangers, keep small children away from the processing room while soap is being made.

 

If you follow this process very well, you should be able to make some plantain soap in the house. Please don’t forget to leave your comment and also don’t forget to follow our blog to learn how to produce other products.

HOW TO MAKE HAND SANITIZER SPRAY

 

Hand Sanitizer spray has over the years been a very essential commodity in the health industry. However and in recently times, this COVID-19 era, hand sanitizer is particularly in important in our everyday life. It is therefore important for people to get the knowledge and the skills to preparing this essential commodity for themselves and their families. This article provides a detail preparation process for hand sanitizer spray and also provides the ingredients with measure for the purpose of home use.

 

INGREDIENTS

The following are the known and widely used ingredients for making mouthwash. However, there are other ingredients that are also used to preparing mouthwash. Those ingredients would be discussed here in the future.

1.      Hydrogen peroxide (1%)                    20 ml

2.      Distilled or purified water                  100 ml

3.      Glycerin                                              20 ml

4.      Ethanol                                                300 ml

5.      Fragrance (Optional)                           Drops

6.      Color (Optional)                                  Drops

 

PROCESS

1.      Measure your alcohol into your bowl.

2.      Add your water to it. If you don’t have distilled or purified water, add EDTA to tap water to deionized it so you can use it.

3.      Add your hydrogen peroxide to it and stir very well.

4.      Add glycerin to it and stir very.

5.      Add about 2 drops of fragrance of your choice to it.

6.      If you want color, you can add about 2 drops to it and stir.

7.      You are done.

 

If you follow the process very well, you should be able to produce about 140ml of HAND SANITIZER SPRAY without any problem. If you want to use it for business…kindly call me on 0541678743.

Please don’t forget to leave your comment and also don’t forget to follow our blog to learn how to produce other products.

HOW TO MAKE MOUTH WASH

 

Mouthwash is an essential commodity in the home. It is therefore important to learn how to make mouthwash at home. This article provides the detailed steps and ingredients to preparing mouthwash at home.

 

INGREDIENTS

The following are the known and widely used ingredients for making mouthwash. However, there are other ingredients that are also used to preparing mouthwash. Those ingredients would be discussed here in the future.

1.      Hydrogen peroxide (1%)                    20 ml

2.      Distilled or purified water                  100 ml

3.      Glycerin                                              20 ml

4.      Color (Optional)

 

PROCESS

1.      Measure your water into your bowl. If you don’t have distilled or purified water, add EDTA to tap water to deionized it so you can use it.

2.      Add your hydrogen peroxide to it and stir very well.

3.      Add glycerin to it and stir very.

4.      If you want color, you can add about 2 drops to it and stir.

5.      You are done.

 

If you follow the process very well, you should be able to produce about 140ml of Mouthwash without any problem. If you want to use it for business…kindly call me on 0541678743.

Please don’t forget to leave your comment and also don’t forget to follow our blog to learn how to produce other products.

 

HOW TO MAKE BLACK SPOT REMOVING LOTION/CREAM

 

You cannot think of skin care without thinking about body lotion and cream. This article provides you with the base ingredient and process to producing black spot removing lotion or cream. You should be able to make the black spot removing lotion if you follow the steps outlined in this article.

INGREDIENTS

The ingredients listed in this article are what we have used to produce our cream base. However, there are other ingredients that some people add when preparing their cream base which does not exempt the ingredients listed below.

1.      Cream Base                       250 grams                         

2.      Lanolin                              5 grams

3.      Kojic acid                          5 grams

4.      Ascorbic acid                    5 grams

5.      Honey                               5 ml

6.      Titanium dioxide               5 grams

7.      Vitamin C powder                        5 grams

8.      Essential Oils                    5 ml each

9.      Fragrance                          15 ml

10.  Hydroquine                       10 grams

PROCESS

1.       Pour your cream base into your bowl,

2.       Add all the ingredients in their measurements to it except the fragrance

3.       Add water to it and stir very well.

4.       Continue to add water and keep stirring until you get the thickness.

5.       After getting the thickness you want, add your fragrance.

6.       Package your product.

7.       You are done!

If you follow the process very well, you should be able to produce your Black spot removing lotion without any problem. If you want to use it for business…kindly call me on 0541678743.

Please don’t forget to leave your comment and also don’t forget to follow our blog to learn how to produce other products.